Petrol station Automatic Tank Gauge manufacturer.
|Place of Origin:||China|
|Certification:||PCEC Explossion proof|
|Minimum Order Quantity:||1 SETS|
|Packaging Details:||Automatic tank gauge wooden case packing|
|Delivery Time:||5-7 working days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Supply Ability:||5000SETS per month|
|Power Supply:||AC220V||Material:||Stainless Steel|
|Usage:||Measure Fuel Level, Water Level, Temperature||Product Name:||Fuel Management System|
|Explosion Proof:||Yes Used For Oil And Water Measurement||Ip Rate:||IP68|
SS316L Automatic Tank Gauge,
IP68 Automatic Tank Gauge,
AC220V Automatic Tank Gauge
Stainless Steel 316L Oil Tank Level Control Fuel Management System
Automatic Tank Gauge (ATG) system consists of Magnetostrictive Probe and Smart Console, it is an electronic device, whose basic function is to monitor the fuel level in the tank. It can also tell the operator what is going on inside the tank. In other words, it gives us very important information like fuel level, volume and temperature, water level and volume, high and low fuel level warnings etc. There are different plans to satisfy different customers according to their effective demands.
|Purpose||To measure fuel level, water level and temperature|
|Titles of medium||Gasoline, diesel, kerosene, ethanol , water etc.|
|State of medium||Liquid|
|Explosion-proof grade||ExiaIIBT4 (Intrinsically safe)|
|Certificate||PCEC Conformity Certificate of Explosion-proof / Permit of Manufacture Measuring Instruments|
|Water Level Accuracy||±0.5mm|
|Environmental Temperature Effect||Error<0.2mm|
|Lowest Product Inactive Zone||2.5'' floater-180mm|
|Lowest Water Inactive Zone||2.5'' floater-25mm|
|Measured Variable||Product level, interface level and temperature of 5 sensors and average temperature|
|Method of Communication||RS-485|
|Protection Class of Probe Canister||IP67|
|Max Communication Distance||1200m|
Each sensor is connected to the ATG through an intrinsically safe set of wires. These wires must be incapable of producing heat or spark that would ignite fuel vapors. Intrinsically safe devices are low voltage circuits that protect the sensor wiring from producing a short and igniting fuel in the tank or sumps. ATGs are constantly monitoring the sensors installed at the site. These systems are also capable of shutting down dispensers, reducing the flow of in-tank pumps, and notifying the owner/operator that a problem has been detected. Methods of notification include text, email, fax, or external polling systems like a facility security alarm. ATGs are initially programmed by the tank service company to provide alerts at specific thresholds. Owners can specify a product level in inches or gallons that trigger a notification to a fuel delivery company. When the delivery is made the ATG measures the new level and provides a delivery report of inches and volume gained. In gasoline service stations, this volume is compared against sales at each pump, to reconcile the difference in the volume gained versus the fuel that was dispensed at the time of delivery.
ATGs are capable of monitoring levels and providing leak alarms but they also provide control of pumps. In the case of a generator where the fuel is supplied from a 110-gallon day tank or base tank, if the fuel level drops in the tank, the ATG can energize a transfer pump that will refill the day or base tank from a larger underground or aboveground tank.
Fuel dispensers have meters that measure the amount of fuel being pumped. ATG’s can indicate that a meter may be out of calibration if the inventory does not match the dispensed volume.
Oil Water Separator System
ATGs can be configured to monitor the oil level that accumulates in an oil-water separator system (OWSS). The OWSS collects rainwater and separates out oil and other hydrocarbons before discharging clean water to storm drains. An ATG is used to notify the owner or waste management company to remove the accumulated oil when it reaches a certain thickness or depth in the tank.
Preparation Before Installation
The following preparation should be down before the liquid level meter installation.
1. Provide necessary conditions for the customers visiting factory.
2. Good quality with competitive price.
3. All products have been strictly Quality Checked before shipping.
4. Free repair within 12 months.
5. Great after-sale service and offer solution within 24 hours.
6.OEM is ok.
Contact Person: Sally Yu