protecting the environment 220V petroleum fuels Automatic Pipe Line Leakage Detector

GUIHE factory oil& water leak sensor /UPP/KPS/Pipe leak detector for gas station

Safety is the number 1 concern of most companies involved in the handling of petroleum fuels, and protecting the environment is a close second. The regulatory framework in both areas is getting progressively tighter, so if your business involves the production, transportation, storage, refining or consumption of fuels, you need to consider the possibility of a leak.

In some situations the potential source of a leak can be anticipated. A valve pit, an overfill containment or a low point sump is an ideal location for a fast acting fuel probe. Quickly knowing that fuel is accumulating in an unexpected area can be the key to avoiding a catastrophic accident or expensive clean-up.

Don’t make the mistake of thinking that a “slow” leak is a “small” leak. A slow leak results in a large spill if the detection system is too insensitive to detect leaks below a given threshold or below a certain percentage of flow. Far too many leaks are discovered when someone notices the smell of fuel, or after surface/below ground water has become contaminated.

Product introduction:

Specifications

GH-SL Pipe leakage detector is composed of a SYW-SL leakage detection sensor, GH-SL detecting controller and other related accessories,.The leakage detector have real-time monitoring function. It is specially designed for detecting water and oil between the pipeline interlayer .When leakage occurs between the pipeline interlayer , the leaked liquid will gravity to the bulk tank , the SYW-SL sensor who keep in the bulk tank can detect the leaked liquid and make the signal to GH-SL controller , the controller get the signal and make the lights and audio alarm .Users can make a timely response and take related measures to avoid potential safety hazards and environmental pollution based on the alarm.

The detector is equipped with switch value output signal ,so it can realize interlocking control with third-party equipment .

1, Panel introduction of GH-SL pipeline leakage detecting instrument

** Detection status lamp

** Detection button

** Silence switch

** Power switch

** Fuse holder

** Power line

** Earthing bolt

** Communication line inlet port

2, Wiring port description of GH-SL pipeline leakage detecting instrument

** Status lamp flat cable faucet (socket)

** Power supply port for mainboard

** Alarm port

** Relay output port

** Leakage sensor terminal interface

 Technical Parameters:  

** Detector voltage:220VAC                         ** Sensor voltage :+12VDC

** Alarming mode :audible and visual alarm    **inspection time:≤1s

** Range of temperature :-40℃~+70℃      ** Environment humidity:<85%

** Output mode:switch value                        ** Cabling mode:Parallel input

** Detector size:300*180*113                      ** Number of supported sensors :12

Simple and reliable detection

Simply and reliably detect the presence of liquid in the containment sump with the Non-Discriminating Piping Sump Sensor.